WATERPROOFING SOLUTION B15-5

Made with high quality chemicals from Germany. It does not make up the shadow or change the color of the material, maintaining the beauty of the stone in a natural way. Suitable for use on marble, granite. Various natural stones Sandstone, terracotta brick Gravel wash Wash sand, cement or grooves to help prevent plaque and moss. Mold or stains Various impurities that may damage the beauty of the material.

instruction

- For flooring or wall covering with marble, granite and other natural stones. 

1. Clean all sides of the material surface free of grease, dust and dirt and leave to dry completely.
2. Apply antiseptic to all 6 surfaces of the material or soak the material into the tray where the solution is filled so that the solution slowly seeps into the material for 10-20 seconds. 
3. Lift it up and let the material dry for about 24 hours. If some residue remains are found on the rock surface as it does not completely penetrate the material, wipe it off immediately with a clean, dry cloth to prevent stains from forming when the solution is completely dry.

-For the protection of natural stone surfaces so that they do not stain. Water seepage, moss Mold and limestone

1. Clean all sides of the material surface free of grease, dust and dirt and leave to dry completely.
2. Use a paint brush or a regular chemical roller. Apply or roll the waterproofing back and forth on the surface until it is thorough on all areas, then allow the applied area to dry completely (24 hours) before normal use.

Caution: Should this get in your eyes, rinse immediately with plenty of clean water and seek medical attention if irritation does not improve.

Usage : 80-150 grams per 1 sq.m. It depends on the porosity characteristics of the material.

- Prices are subject to 7% VAT